Home > Trade News and Trends > How to correctly deal with the problem of the wire broken wires
How to correctly deal with the problem of the wire broken wires
The article citations:    Editor:Tina    Sentiment:969    Published time:2013-10-25
KENOS  tell you how to correctly deal with the problem of the wire broken wires.general line broken wrie for two reasons.one is machine tools .the second is line problem.Next we will look at how to deal with to solve the problem in this line broken wries.if you still want to know the DongGuan wire cut filter .ect.you can call for enquiry.we offer hotline :0769-8904066
 study of the causes of broken wrie and prevent method of broken wrie is always an important topic in the study of wrie-cutting.technology both at home and abroad.expert note that broken wire are typically associated with an increased short circuit.think silk and short silk will cause the processing speed of vibration reduction and will increased the probability of broken wries.then found in front of  the broken wries.discharge freguenly will increase suddenly.they design the broken wrie control system in the workpiece .research shows that different types of pulse power of wire break warning signal is different.all can reflect the size of the input energy to the spark gap.there will be a sudden increase in front of the broken wries.may be as a warning signal of wrie-breaking in principle.
 Abroad is foreboding to take protecive measures according to the broken wries of wire cutting machine tool quiment .special processing laboratory of nanjing university of aerospace  research of broken wrie.think unstable broken wrie process started in the machining process .machining instability to discharge in piont set.discharge concentration and  discharge in time caused by intensive which makes the input energy gap increase and converge caused by cocal high temperature.the wire electrode was burn out .this is the whole process of broken wries .“Broken wrie” input is the direct cause of thermal load of the gap increase and founded on the piont and the cause is a machining process is not stable so according to the unstable signal processing take effective measure to make it as soon as possible into a stable state .is fundamentally ways to overcome the problem of broken wries
Previous:which will affe...    Next:The wire cut co...
BMF wire accessories related information