| Keep BMF | Hello! Welcome to BMF Hardware！ Log in | Register |

Wire EDM everyone to know how much? Wire EDM can be used in what areas? Kenos as wire EDM supplies in China for you to explain in detail.

① Inplace in advance of forming rough machining or EDM machine with perforated good Φ1.0-Φ1.5mm wear silk hole, wearing silk hole centers and the introduction of the punch contour line between cutting length l Select 5-10mm.
② Width of the contour line of the punch edge of the blank and the blank should ensure that the thickness of at least 1/5.

③ Reserved for subsequent cutting the connecting portion (pause point) should be selected in the center of gravity close to the site of the workpiece blank, the width of the selected 3-4mm.

④ To compensate for torsional deformation of the deformation of most of the residual left in the first stage of a roughing cut, to increase the offset of 0.5-0.8mm. Follow-up three times using fine cut way, due to the small cut margin, the amount of deformation is also smaller.

⑤ After four most shape cutting is completed, the workpiece with compressed air, then alcohol solution rough end face wash, dry, and then use an adhesive or liquid fast rubber (usually 502 quick-drying glue) the grinder grind through the metal sheet thickness of about 1.5mm on the rough cement, and then four times previously reserved for offset cutting the connection portion of the workpiece (Note: Do not put plastic under the faucet or dripping water droplets into the workpiece reserved on the connecting portion, so as to avoid non-conductive and can not be processed).

These are some of the processing wire EDM spare parts accessory details, in fact, to do the wire EDM spare parts is not difficult, as long as the intention to do, with good quality parts made ​​out of wire cutting process, certainly good effect. That where there is high-quality wire cutting accessories it? Looking LSWEDM accessories, find Kenos, Kenos As China's largest high wire EDM supplier quality, competitive price, high precision, quality assurance, fine workmanship, your trusted Wire EDM supplies in China.